1. If the object is located between the focal point and the diverging lens, the image of the object in this lens is: a

1. If the object is located between the focal point and the diverging lens, the image of the object in this lens is:
a) Virtual and enlarged
b) Virtual and reduced
c) Real and enlarged
d) Real and reduced

2. Placing a convex lens with a large radius of curvature on a flat glass surface can create concentric dark and light circles in the reflected light. This phenomenon is caused by:
a) Refraction of light in the lens
b) Reflection of light from the flat glass surface
c) Formation of a real image in the lens
d) Interference of light waves reflected from the lower surface of the lens and the flat glass surface

3. Corpuscular properties of light manifest during:
a) Diffraction of light
b) Dispersion of white light into a spectrum through a prism
c) Photoelectric effect
d) Interference of two light beams

4. Match the description of a physical process with the corresponding formula:
a) Change in the direction of wave propagation when transitioning from one medium to another
b) Amplification of the amplitude of resultant oscillations
c) Reflection of light
d) Emission of electrons due to the action of light
1. β=α
2. sin⁡α/sin⁡γ =v_1/v_2 =n_21
3. ∆d_max=kλ
4. d sin⁡φ=kλ
5. hν=A_вих+(m_e v_max^2)/2

5. The wavelength of violet light in a vacuum is 400 nm. Determine the frequency of this wave.

6. The work function of copper is 4.7 eV. Find the red limit of the photoelectric effect for copper.

7. When illuminating a diffraction grating with light of a wavelength of 590 nm, the third-order spectrum is visible at an angle of 10°. Determine the wavelength for which the second-order spectrum obtained from the same diffraction grating will be visible at an angle of 6°.

8. In a body of water with a depth of 1.5 meters, a pole is submerged, with the upper part of the pole extending 0.5 meters above the water’s surface. Calculate the length of the shadow on the water’s surface and at the bottom of the water body when the Sun is 60° above the horizon.

Тема: Оптика

Объяснение:
1. Если объект расположен между фокусом и неподвижной линзой, то изображение этого объекта в этой линзе будет виртуальным и увеличенным. Виртуальное изображение означает, что лучи света не сходятся фактически в точке, а только продолжают своё движение. Увеличенное изображение означает, что изображение будет больше, чем сам объект.

2. Расположение выпуклой линзы с большим радиусом кривизны на плоской стеклянной поверхности может создать концентрические темные и светлые круги в отраженном свете. Это явление вызвано отражением света от плоской стеклянной поверхности. Когда свет падает на поверхность, он отражается под углом, зависящим от закона отражения. Это создает интерференцию световых волн, что приводит к формированию темных и светлых кругов.

Пример использования:
Задача 1: Где будет изображено объект при нахождении между фокусом и неподвижной линзой?
Ответ: а) Виртуальное и увеличенное.

Задача 2: Что вызывает появление концентрических темных и светлых кругов при размещении выпуклой линзы с большим радиусом кривизны на плоской стеклянной поверхности?
Ответ: b) Отражение света от плоской стеклянной поверхности.

Совет:
— Для лучшего понимания оптики важно запомнить основные законы преломления и отражения света.
— Регулярное решение задач и практика помогут вам лучше усвоить материал.

Упражнение:
Почему изображение объекта, расположенного на главной оптической оси, совпадает с объектом? (Ответ: Изображение совпадает с объектом на главной оптической оси, потому что лучи света, проходящие через центр линзы, не преломляются и продолжают свой путь прямо.)

Твой друг не знает ответ? Расскажи!