Напишіть процедуру для маніпулювання шлюзовими воротами, якби ви були оператором. Використовуйте доступні команди: відчинити
To shut gate number 1, you need to use the command «зачинити ворота 1». This command will close gate number 1 and prevent any water from passing through it.
Opening gate number 1:
If you want to open gate number 1, you can use the command «відчинити ворота 1». This command will lift the gate and allow water to pass through it.
Emptying chamber number 1:
To empty chamber number 1, you can use the command «спустити воду з камери 1». This command will open all the gates connected to chamber 1, allowing the water to flow out.
Filling chamber number 1:
If you want to fill chamber number 1, you can use the command «запустити воду в камеру 1». This command will open all the gates leading to chamber 1, allowing water to flow in and fill the chamber.
Moving to chamber number 1:
To move to chamber number 1, use the command «перейти в камеру 1». This command will instruct you to go to chamber 1 and perform any necessary operations there.
Дополнительный материал:
Let’s say you need to shut gate number 1 and empty chamber number 1. You would use the following commands:
1. «зачинити ворота 1» — to shut gate number 1.
2. «спустити воду з камери 1» — to empty chamber number 1.
Совет:
When manipulating the gates, it’s important to follow the sequence of operations. For example, before opening or closing a gate, make sure to be in the correct chamber. Also, always double-check your commands before executing them to avoid any errors.
Практика:
Write down the commands you would use to open gate number 2 and fill chamber number 3.